Table of content

www.kudos.be

Linux

List of plugins

Plugin
check_linux_burp_backup
check_linux_burp_status
check_linux_file_age
check_linux_file_change
check_linux_fs_mounts
check_linux_fs_usage
check_linux_hpacucli
check_linux_hpasmcli
check_linux_hplog
check_linux_hpssacli
check_linux_httpd_status
check_linux_mysqld_status
check_linux_named_status
check_linux_ntp_status
check_linux_postfix_status
check_linux_process_limits
check_linux_root_crontab
check_linux_samba_status
check_linux_shorewall_status
check_linux_sshd_status
check_linux_vz_ct_counters
check_linux_vz_ct_status
check_linux_winbind_status

List of messages

Message Plugin Action
backup ${_BACKUP_RUN} of client ${_BURP_CLIENT} has too many warnings (${_BACKUP_WARNINGS}>${_BURP_WARNINGS}) check_linux_burp_backup check the backup for errors and/or warnings
backup ${_BACKUP_RUN} of client ${_BURP_CLIENT} is too old (>${_BURP_AGE}) check_linux_burp_backup check why the backup has <x> days
backup ${_BACKUP_RUN} of client ${_BURP_CLIENT} is too old (>${_BURP_AGE}) and
has too many warnings (${_BACKUP_WARNINGS}>${_BURP_WARNINGS})
check_linux_burp_backup check the backup for errors and/or warnings, check why the backup has <x> days
backup ${_BACKUP_RUN} of client ${_BURP_CLIENT} is OK check_linux_burp_backup n/a
burp is not running check_linux_burp_status burp server is not running. Start with /etc/init.d/burp start
could not determine status of burp check_linux_burp_status run in debug mode for more information
burp is running check_linux_burp_status n/a
file age of ${_FILE_AGE} has expired on ${_FILE_PATH} check_linux_file_age age of requested file is greater than expiry time. An update to the file was not done in a timely fashion
file age of ${_FILE_AGE} has not expired on ${_FILE_PATH} check_linux_file_age n/a
${_FILE_TO_CHECK} is not a file or has disappeared check_hpux_file_change monitored file has disappeared or it is not a file. Check the path & file.
cannot compute checksum [${_FILE_TYPE}] for ${_FILE_TO_CHECK} check_hpux_file_change could not compute new checksum for the file. Run with debug for mode information
${_FILE_TO_CHECK} has a changed checksum [${_FILE_TYPE}] check_hpux_file_change monitored file was changed. Verify the file.
${_FILE_TO_CHECK} has the same checksum [${_FILE_TYPE}] check_hpux_file_change n/a
${_FILE_TO_CHECK} is a new file [${_FILE_TYPE}] check_hpux_file_change n/a
${_FS} is not mounted check_linux_fs_mounts remount the filesystem
${_FS} is mounted check_linux_fs_mounts n/a
${_FS} does not exceed its inode threshold (${_INODES_USAGE}%>${_CFG_INODES_THRESHOLD}%) check_hpux_fs_usage n/a
${_FS} does exceeds its inode threshold (${_INODES_USAGE}%<=${_CFG_INODES_THRESHOLD}%) check_hpux_fs_usage clean up directories/files on ${_FS}
${_FS} does not exceed its space threshold (${_SPACE_USAGE}%<=${_CFG_SPACE_THRESHOLD}%) check_hpux_fs_usage n/a
${_FS} exceeds its space threshold (${_SPACE_USAGE}%>${_CFG_SPACE_THRESHOLD}%) check_hpux_fs_usage clean up directories/files on ${_FS}
failure in controller check_linux_hpacucli use the HP Proliant tools to get more diagnostic information.
failure in enclosure for controller ${_SLOT} check_linux_hpacucli use the HP Proliant tools to get more diagnostic information.
failure in physical drive(s) for controller ${_SLOT} check_linux_hpacucli use the HP Proliant tools to get more diagnostic information.
failure in logical drive(s) for controller ${_SLOT} check_linux_hpacucli use the HP Proliant tools to get more diagnostic information.
no problems detected by {${_HPACUCLI_BIN}} check_linux_hpacucli n/a
failure in 'SHOW FANS', unit ${_UNIT} check_linux_hpasmcli use the HP Proliant tools to get more diagnostic information.
failure in 'SHOW DIMM' check_linux_hpasmcli use the HP Proliant tools to get more diagnostic information.
failure in 'SHOW POWERSUPPLY' check_linux_hpasmcli use the HP Proliant tools to get more diagnostic information.
failure in 'SHOW SERVER' check_linux_hpasmcli use the HP Proliant tools to get more diagnostic information.
failure in 'SHOW TEMP', unit ${_UNIT} has ${_VALUE} >= ${_VALUE} check_linux_hpasmcli use the HP Proliant tools to get more diagnostic information.
no problems detected by {${_HPASMCLI_BIN}} check_linux_hpasmcli n/a
failure in controller check_linux_hpssacli use the HP Proliant tools to get more diagnostic information.
failure in enclosure for controller ${_SLOT} check_linux_hpssacli use the HP Proliant tools to get more diagnostic information.
failure in physical drive(s) for controller ${_SLOT} check_linux_hpssacli use the HP Proliant tools to get more diagnostic information.
failure in logical drive(s) for controller ${_SLOT} check_linux_hpssacli use the HP Proliant tools to get more diagnostic information.
no problems detected by {${_HPSSACLI_BIN}} check_linux_hpssacli n/a
httpd is not running check_linux_httpd_status httpd (apache) is not running. Start with /etc/init.d/httpd start
could not determine status of httpd check_linux_httpd_status run in debug mode for more information
httpd is running check_linux_httpd_status n/a
httpd configuration files have syntax error(s) {httpd -s} check_linux_httpd_status check the httpd configuration for errors
httpd configuration files are syntactically correct check_linux_httpd_status n/a
mysqld/mariadb is not running check_linux_mysqld_status MySQL is not running. Start with /etc/init.d/mysqld start
mysqld/mariadb is running check_linux_mysqld_status n/a
state of table ${_MYSQL_TABLE} is NOK check_linux_mysqld_status Run mysqlcheck/mysqlrepair on the table
state of table ${_MYSQL_TABLE} is OK check_linux_mysqld_status n/a
named is not running check_linux_named_status named (BIND) is not running. Start with /etc/init.d/named start
could not determine status of named check_linux_named_status run in debug mode for more information
named is running check_linux_named_status n/a
named configuration and/or zones have syntax error(s) {named-checkconf -z} check_linux_named_status check the BIND configuration for errors
named & zones configuration files are syntactically correct check_linux_named_status n/a
postfix is not running check_linux_postfix_status postfix is not running. Start with /etc/init.d/postfix start
could not determine status of postfix check_linux_postfix_status run in debug mode for more information
postfix is running check_linux_postfix_status n/a
limit (${_LIMIT_TYPE}) on '${_LIMIT_NAME}' is safe (${_CURR_VALUE} <= ${_LIMIT_VALUE} @${_LIMIT_THRESHOLD}%) check_linux_process_limits n/a
'${_CRON_ENTRY}' is not configured in cron check_linux_root_crontab a required job entry is not present in the root crontab. Re-add the entry.
'${_CRON_ENTRY}' is configured multiple times in cron check_linux_root_crontab remove the duplicate line
'${_CRON_ENTRY}' is configured in cron check_linux_root_crontab n/a
'${_PARAM} (${_VALUE} ...)' is not correctly configured for ${_INSTANCE} check_linux_sg_cluster_config one or more cluster parameters are not correct. Correct the cluster configuration file, check (cmcheckconf -C) & apply (cmcapplyconf -C)
NMB/SMB are not running check_linux_samba_status NMB/SMB is not running. Start with /etc/init.d/samba start
NMB is not running check_linux_samba_status NMB is not running. Start with /etc/init.d/samba start
SMB is not running check_linux_samba_status SMB is not running. Start with /etc/init.d/samba start
could not determine status of NMB/SMB check_linux_samba_status run in debug mode for more information
NMB/SMB are running check_linux_samba_status n/a
shorewall is not running {shorewall status} check_linux_shorewall_status shorewall is not running. Start with /etc/init.d/shorewall start
shorewall is running check_linux_shorewall_status n/a
shorewall rules do not compile correctly {shorewall check} check_linux_shorewall_status shorewall is not running. Start with /etc/init.d/shorewall start
shorewall rules compile correctly check_linux_shorewall_status n/a
sshd is not running check_linux_sshd_status winbind is not running. Start with /etc/init.d/winbind start
could not determine status of sshd check_linux_sshd_status run in debug mode for more information
sshd is running check_linux_sshd_status n/a
${_UBC_NAME} for CT ${_CT_ID} is unchanged [HELD:${_UBC_HELD}/MAX_HELD:${_UBC_MAX_HELD}] check_linux_vz_ct_counters n/a
${_UBC_NAME} for CT ${_CT_ID} increased with ${_UBC_FAIL} [HELD:${_UBC_HELD}/MAX_HELD:${_UBC_MAX_HELD}] check_linux_vz_ct_counters n/a
container ${_CT_ID} has a wrong status [{$_CT_RUN_STATUS}] check_linux_vz_ct_status is the container running?
container ${_CT_ID} has a correct status [{$_CT_RUN_STATUS}] check_linux_vz_ct_status n/a
container ${_CT_ID} has a wrong boot flag [${_CT_RUN_BOOT}] check_linux_vz_ct_status is the container set for autoboot?
container ${_CT_ID} has a correct boot flag [${_CT_RUN_BOOT}] check_linux_vz_ct_status n/a
winbind is not running check_linux_winbind_status winbind is not running. Start with /etc/init.d/winbind start
could not determine status of winbind check_linux_winbind_status run in debug mode for more information
winbind is running check_linux_winbind_status n/a



Backlinks: Projects:Health checker Projects:Health checker:Structure